Epoxy Flooring in West Valley City, UT

Epoxy flooring in West Valley City changes a good deal depending on which side of town you live on. Wikipedia describes eastern neighborhoods as mostly 1960s and 1970s brick ranch homes, while the western side grew out of 1990s and 2000s planned developments. Census survey data backs that up: about 24.4% of homes date from the 1970s and another 18.9% from the 1990s. A floor plan that suits one half of the city may not suit the other.

East side: brick ranches with history

A garage attached to a 50-year-old ranch has usually seen a few owners. We often find oil stains, old sealers and slab joints that have opened over time. Those floors need a heavier grind and careful crack filling before a primer goes down. Full broadcast flake works well here because the texture hides small surface flaws that remain after repair.

West side: newer concrete, different questions

Homes from the 1990s and 2000s usually have flatter, cleaner slabs, but they bring their own issues. Builders sometimes applied a cure-and-seal product that blocks adhesion, and some garages have never been ground at all. We check for those coatings before quoting, because a primer that cannot soak in will not stay put.

Get a Free Estimate

A city of drivers and haulers

Some of the city's largest employers move freight. A 2017 city report listed UPS with 1,320 workers and Swift Transportation with 1,118, and trucking company C.R. England is based here too. Light industrial development sits north of Parkway Boulevard. Workshops, fleet bays and loading areas take hot tires, diesel drips and pallet jacks. For those floors we suggest a thicker 100% solids epoxy finished in a topcoat that stands up to chemicals, plus painted lane lines.

Busy households, practical finishes

The 2020 census counted 40,774 households, and 45.1% had children under 18. Family garages double as bike storage, sports-gear rooms and play space on rainy days. A mid-tone flake blend hides dirt between cleanings, and a light grit in the topcoat keeps small feet steady on a wet floor.

What to expect on install day

A typical garage is done in a day or two, with the exact time set by the system and how much prep the slab needs. We move through grinding, repairs, base coat, flake and topcoat in order, and before we leave you know when it is safe to walk on and when a car can come back in.