Named for the Jordan River

Epoxy Flooring in Riverton, UT

Hard-wearing garage floors for a town of owner-occupied family homes.

Free estimates on site: we measure your slab and inspect it in person
A moisture reading on the slab before we put down a single coat
A written quote that explains every surface prep step

Built for Family Life

Epoxy flooring in Riverton is mostly a family-garage job. Owners live in about 84.9% of Riverton's occupied homes, and single-family detached houses make up 78.1% of local housing, according to Census survey data. Many garages here hold two cars, plus bikes, strollers, sports gear and a freezer. A floor in that kind of space needs to stand up to a lot.

Homes from the 1990s and 2000s

Riverton grew fast. The population went from 11,261 in 1990 to 25,011 in 2000 and 38,753 in 2010. Survey data dates about 26.2% of local housing to the 1990s and 30.3% to the 2000s. Those slabs are now 15 to 35 years old. Most are in good shape, but they may have oil stains, small cracks or a builder-applied sealer that has to be ground away before fresh resin can bond.

Summer heat and hot tires

Wikipedia notes that Riverton summers occasionally top 100 degrees. Hot tires can lift cheap garage coatings, a problem called hot-tire pickup. A professionally applied base coat with a polyaspartic topcoat holds up much better than a hardware-store kit.

Get a Free Estimate

Winter snow

Riverton gets snow in winter, and cars bring in slush and road salt. Coated floors hold that water up on the surface, so a squeegee can push it out the door. A flake finish adds texture for better grip on a wet floor.

Farm roots and outbuildings

Riverton started as a farm town. Three canals carried Jordan River water to the benchland, and crops included alfalfa, wheat and sugar beets. Some properties still have shops, barns or outbuildings with concrete floors. We can coat those too, with thicker systems for equipment and tools.

Choosing a color

Families often pick mid-tone flake blends that hide dirt between cleanings. If your garage is also a workshop, a lighter color can make small parts easier to find. Our sample boards let you compare blends side by side.

Outbuilding and shop floors

Shops on older farm parcels tend to have slabs poured at different times, sometimes with additions joined to the original floor. Those seams need attention before coating. We fill or honor them depending on whether they still move, and we may suggest a thicker system where tractors or trailers park.

Riverton Homes and Climate

Owner-occupied. Owners occupy about 84.9% of homes; single-family detached houses are 78.1% of units (ACS, Point2Homes).
Housing age. 1990s construction: about 26.2% of homes; 2000s: 30.3%.
Summer heat. Riverton summer temperatures occasionally exceed 100 degrees Fahrenheit.
Farm roots. Three canals carried Jordan River water to the benchland, supporting alfalfa, wheat and sugar beets.

Polyaspartic Floors in Salt Lake City, UT

Our Services in Riverton, UT

Riverton Questions

Why do some garage floors lift under hot tires, and how is that prevented?

Hot tires can soften and lift thin coatings. A ground surface, a solid base coat and a polyaspartic topcoat prevent most cases.

Can you coat a shop or barn floor in Riverton?

Yes. We assess the slab and recommend a thicker system for equipment and tools.

My 2000s garage floor looks fine. Does it still need grinding?

Yes. Even clean slabs need a ground profile so the primer can bond. Builder sealers also need to come off.

Should a Riverton family pick flake or solid color?

Flake is usually the easier choice for a busy household because it hides dirt and adds grip. Solid color looks crisp but shows dust and scuffs sooner. We bring both to the estimate.

Free Estimates in Riverton, UT

Book a free Riverton estimate for the garage, the shop or that outbuilding out back.

Call (385) 527-3368 Free Estimate